USB Blaster Adapter Cable

Forums Forums General USB Blaster Adapter Cable

This topic contains 0 replies, has 1 voice, and was last updated by  scott.l.baker 4 months, 1 week ago.

Viewing 1 post (of 1 total)
  • Author
  • #2322


    I just purchase a Sno board that I plan to use for FPGA development (using Quartus).
    I would like to program the Sno board with a USB Blaster.
    Can you send me a wiring diagram so that I can create an adapter to connect the 10-pin USB Blaster with the JTag pins on the Sno board.

Viewing 1 post (of 1 total)

You must be logged in to reply to this topic.