Schematic

Forums Forums General Schematic

Tagged: 

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • #2211
    rnhill
    Participant

    Where can I download the schematic and/or top level HDL design or pin definitions?

    Maybe even a quartus project to start with?

    #2212
    Jason Pecor
    Keymaster

    The XLR8 board schematic is available as part of the User Manual which can be found here:

    https://www.aloriumtech.com/documents/XLR8UserManual.pdf

    We also have a single-page pin map that provides a cross-reference to the FPGA pins:

    https://www.aloriumtech.com/documents/XLR8_Pin_Map.pdf

    If you want to take a look at the top-level Verilog, you can install the XLR8BuildTemplate library via the Arduino IDE or download it directly from our Github repository here:

    https://github.com/AloriumTechnology/XLR8BuildTemplate

    The top-level is located in /XLR8BuildTemplate-master/extras/rtl/.

    The specific location of this file will be different, if you installed it via Arduino, depending upon what platform you are using – Mac, Windows, Linux.

    Does this address your question?

    Jason

    #2213
    rnhill
    Participant

    Yes. Thank you so much for the quick response!

    Rick Hill

    #2214
    Jason Pecor
    Keymaster

    Our pleasure, Rick!

    #2217
    Fatsie
    Participant

    The schematics in the User Manual may need some love. They seem to be low resolution images and make a lot of the labels unreadable.

    #2219
    Jason Pecor
    Keymaster

    Yes, I agree. We will upgrade the readability of the schematics and update the manual.

    Thanks!
    Jason

Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.